a cute kitten
12.1 C
New York
Friday, May 14, 2021

How to make tv antenna? Get FREE TV!! Antenna plane

How to make a tv antenna? Get FREE TV! on television with this wonderful and powerful aerial antenna to watch channels in your country.

This model of tv antenna has been requested by the members of jmactualidades.com, for us in a pleasure to be able to please you.

As you can see it is one of the most complete antennas that we can find on the internet.

This antenna is basically composed of V-dipoles, as well as reflectors for each segment.

This allows you to reach far away areas and get the best picture quality from the TV set.

I invite you to take a detailed look at this content.

Elements of the tv antenna.

  1. inch aluminum profile.
    You need to look for a 1 inch or 2.5Cm aluminum profile with a length of 90 Cm.

2. 3/4 inch PVC pipe.
Look for pvc pipe preferably 3/4 inch by 36 inch length.

3. 3/4 inch PVC plugs.
3/4 inch female pvc plugs preferably flat face.

4. 1/2 in. aluminum pipe.
Get 13 mm diameter aluminum pipe preferably for 4 meters in length.

5. Aluminum plate of 13 mm wide by 1 mm thick.
It is recommended that you get 6 meters of this plate or similar material.

6. 1/8 inch lag screws.
You will need 1/8″ lag screws by 1″ long, knurled head.

7. 1/8″ rivets.
Look for rivets 1/8 in. by 1/8 in. in length.

8. 16 gauge insulated copper wire.
It is impontant to get copper wire with its rubber insulator approximately 1 meter and 1/2 meter long.

9. RG6 coaxial cable.
You need 30 Cm of RG6 coaxial cable.

10. Female RG6 connector for coaxial cable.
You only need one connector.

To perform this activity you must use a ruler to measure, a pencil to mark, a 1/8″ drill bit and an electric drill.

Preparation Boom of the tv antenna step 2
In the next step we will take the side face and make the 1/2 inch diameter holes where we will place the elements that make up the antenna.

Measurements of the Boom side face.
Look at the image with details of the measures and distance of each hole that you must make in the aluminum profile to place the reflector elements.

To perform this activity you must again use a ruler to measure, a pencil to mark, a 1/2 inch drill bit and an electric drill.

TV antenna reflectors step 3
You must find the aluminum tube 1/2 inch in diameter and we will cut 12 pieces of 55.8 Cm.

How to make a tv antenna Reflector assembly.

Assemble the Reflectors step 4
We will take the 12 reflectors and the boom and we will place these elements.

I leave you a video to assemble the reflector.
Below you can click to run the video.

Place the dipole brackets on the boom step 5.
Choose 5 3/4 inch PVC plugs with 12 (1/8 x 1/2) inch rivets and assemble the base for the dipoles.

Here is a video on how to assemble the reflector.
Below you can click to run the video.

TV antenna dipole supports.

Preparing the TV antenna dipole supports step 6
In the materials described at the beginning, find the 3/4 inch PVC pipe and make 5 cuts of 8.5 cm in length.

Tools to cut PVC pipe
You can use a 1/2″ to 1″ PVC pipe cutter or a hacksaw frame.
Remember to use a ruler to mark the measurements.

How to assemble the TV antenna dipole supports.

TV antenna dipole brackets step 7
Take each previously cut tube and 5 3/4 inch plugs and install them on the assembled reflector.

Video with instructions on how to assemble a tv antenna?.

Once the supports for the dipoles have been placed, we will continue with the fabrication and placement of the most important elements of the antenna.

How to make the V dipoles for tv antenna.

V dipoles tv antenna step 8
Next we will make the construction of the dipoles of the TV antenna for it looks for the sheet of 13 mm wide by 1 mm thick.

Cutting the dipoles for the antenna
With the measuring ruler mark on your sheet 58.0 cm in length and cut 8 equal cuts.

V-fold dipoles
Draw a mark in the center of the dipoles and carefully bend them at 30 degrees to form the V shape.
Verify that the separation of the two ends is 10.0 cm wide.
Find a hole punch and where the V begins, drill two 1/8″ holes.

Dipole V how to install

How to install the dipoles V TV antenna step 9
Next we will make the construction of the dipoles of the TV antenna for it looks for the sheet of 13 mm wide by 1 mm thick.

Cutting the dipoles for the antenna
With the measuring ruler mark on your sheet 58.0 cm long and cut 8 equal cuts.

V-fold dipoles
Draw a mark in the center of the dipoles and carefully bend them at 30 degrees to form the V shape.
Verify that the separation of the two ends is 10.0 cm wide.
Find a hole punch and where the V begins, drill two 1/8″ holes.

How to connect the dipoles of the TV antenna.

Connection dipoles V tv antenna step 10
Finally we will make the connection of the dipoles, for this we will use the electrical cable # 16.

Union in cross.
You will make the union of the dipoles in the form of cross following the sequence from the first dipole to dipole 4.

Coaxial cable for tv
Take the coaxial cable and place it in the center of the antenna in the tube that does not have V-dipole.

Plastic plugs.
Place plastic caps on each end of the reflector tubes, as well as on the boom that supports the antenna elements.

Thank you for viewing this content how to make a tv antenna.
Finally connect this antenna through a coaxial cable to the TV, you must place it in a visible place and orient it.

In the initial part is the complete video of this article: How to make a TV antenna? Get FREE TV!.

Related Articles

How to make tv antenna? Get FREE TV!! Antenna plane

0
How to make a tv antenna? Get FREE TV! on television with this wonderful and powerful aerial antenna to watch channels in your country. This model of tv antenna has been requested by the members...

HOW to make a homemade antenna 📡ideal for tv 📺CABLE COAXIAL & CAN FOOD

0
Welcome to JM News today I will show you how to make a homemade antenna ideal for tv, using coaxial cable and food can for this project. We are going to make a homemade hd...

How to find channels on roku tv step by step 2021

0
How to find channels on roku tv serie A⁉️. Applies to A323 and A423, super easy with a few steps, now you can watch 2021 free tv channels. Steps to search for channels on Roku...

Latest Articles

Stay Connected

21,956FansLike
2,470FollowersFollow
14,600SubscribersSubscribe

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies