TV ANTENNAS

How to make the most powerful antenna in the world to receive HD TV channels.

How to make the most powerful antenna in the world to receive HD TV channels.the free channels on our television.

Here is one of the best antennas made to receive all the free channels on our television.

Made with low cost materials, with this antenna you will not have to pay for cable.

Ideal for watching digital, HD and analog channels.

We invite you to watch this content to discover this powerful free tv antenna.

how to make the most powerful antenna in the world to receive hd tv channels

To make the most powerful antenna in the world to receive HD TV channels, we have used the following materials:

– 12 and a half inches of electrical PVC pipe with a diameter of half an inch.

– Also 14 inches of electrical PVC pipe with a diameter of three quarters of an inch.

– A three-quarter PVC plug.

– A three-quarter PVC elbow.

– A straight splice connector for coaxial cable.

– 20 inches of RG6 coaxial cable, with its connector.

– and Aluminum tape.

Steps to make the antenna: first:

A). Take the 3-quart pvc electrical pipe and cut it to 13 inches.

B). Place the PVC elbow at one of the ends.

C). With a pencil make a mark.

D). Look for a sharp element and make a hole to cross the RG6 coaxial cable.

Finally, insert the coaxial cable through the hole in the PVC tube.

Second step to make the antenna:

A). Take the half inch pvc electrical pipe and cut it into 12 and a half inches.

B). On the end of the tube, mark three-eighths of an inch.

C). Now mark 5 and a quarter inches.

D). Repeat this step on the other end of the PVC pipe.

Y). In the center of the PVC pipe make a mark and drill it.

F). Finally, insert the coaxial cable through the center of the PVC tube and take it out through the hole you made.

Third step:

A). At the end of the coaxial cable we peel the tip and divide the mesh and the center of the cable.

B). We will need two screws.

C). We will join the ends of the coaxial cable with the PVC tube.

D). Use a trias screwdriver.

Check that they are well attached.

Step Four:

A). You will need aluminum tape.

B). Now you will roll the aluminum foil between the lines you drew.

C). You will verify that it is in contact with the ends of the coaxial cable.

D). Insert the PVC pipe all the way into the three-quarter-inch pipe.

Finally you place the PVC plug also the PVC elbow and finally place the male f-type connector on the coaxial cable.

Here I present the most powerful antenna in the world to receive free HD TV channels.

It is an ideal antenna for areas where there are frequent electrical storms.

An inexpensive antenna that you can make at home.

With this antenna you will receive all the free channels that are available.

If you were unsubscribed from cable TV services, with this powerful antenna you will have access to all HD TV channels.

Finally we carry out the installation of the antenna and connect the coaxial cable to our television.

Look at the quality of the received signal.

Thanks for viewing this content, I invite you to share it, subscribe to the JM News.

Thank you very much and see you soon.

Leave a Comment

Item added to cart.
0 items - $0.00

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies
Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

Powered By
Best Wordpress Adblock Detecting Plugin | CHP Adblock